Beirut Industrial Drafting Table


$2,249.00
Regular price $2,249.00

Industrial Drafting Table

This hand-crafted industrial drafting table has a gorgeous reclaimed teak wood top featuring clean edges and the water-based catalyzed natural finish on the wood offers durability while showcasing the natural grain of the wood. Affixed to either end of the base are two rods that fit into the industrial cast iron base where the crank mechanism is connected to an antique styled handle, allowing the table's top to be either horizontal (for use as a standard table) or slanted up to a 60 degree angle (to be used as a drafting desk). The crank handle turns this in an industrial standing desk, adjustable in height from 33 inches to 42 inches high.



Removable Stability Bar

This vintage drafting desk comes with a removable metal ledge. This handy ledge lets you place your pens and pencils at your drafting desk without them falling to the ground. And if you're finding that it is in the way, just loosen the screws and remove it from the desk surface. 

Reclaimed Teak Wood Surface

Teak is considered to be the "gold standard" for decay resistance. This is because of its oil retention. While all woods contain oils that protect the tree (think maple sap or tea tree oil), teak exceptionally retains these oils and its rubber even after being felled and processed.

Tilt-able Wood Top

Release the tension on both sides of this table and tilt the entire table top to the degree of your choosing between 0 and 60 degrees to convert this beautiful table into an industrial style drafting desk. Comes with removable metal ledge that can be used for holding pens and pencils at your desk.

Hand Crank Table Lift Mechanism

Industrial old world style table features a hand crank table lift mechanism that is connected to the right side of the iron case base with a gear shaft that helps you easily lift and lower the table as you turn the wheel.

The Fine Print

Product Name: Beirut Industrial Drafting Table
Overall Dimensions: 63"W x 31"D x 33"H
Height Range: 33 to 43 inches High
User Height: Up to 6ft tall
How Much Can this Tilt? From Horizontal to 60 Degree Angle
Wood Top: Reclaimed Teak Wood with Walnut Finish
Base Materials: Hand-forged iron base in antique zinc finish
Weight of Table: 204 lbs.
How Does It Rise? Hand crank
Assembly Required? Yes. Legs and top are shipped separately; tools are provided to affix legs to top. Requires 2 persons and takes 30 minutes
Warranty: 2 Years
Model Number:
HOT-1165
Product Name: Beirut Industrial Drafting Table
Overall Dimensions: 63"W x 31"D x 33"H
Height Range: 33 to 43 inches High
User Height: Up to 6ft tall
How Much Can this Tilt? From Horizontal to 60 Degree Angle
Wood Top: Reclaimed Teak Wood with Walnut Finish
Base Materials: Hand-forged iron base in antique zinc finish
Weight of Table: 204 lbs.
How Does It Rise? Hand crank
Assembly Required? Yes. Legs and top are shipped separately; tools are provided to affix legs to top. Requires 2 persons and takes 30 minutes
Warranty: 2 Years
Model Number:
HOT-1165

Standing Desk Size Chart

Are you confused about what height standing desk you need? Below is a standing desk converter size chart that might help you out (converters sit on top of your existing table or desk).

Standing Desk Size Chart

Some quick notes about this chart:

    • The standard height of a desk = roughly 29 inches. If your desk is different, measure it and adjust the numbers on the chart accordingly.
    • "Lowest height of standing desk converter keyboard tray" = the height from the floor to the top of the keyboard tray if the standing desk converter is at its lowest height.
    • The chart above assumes that the top shelf of the standing desk converters is 4 inches higher than the top of the keyboard tray.
    • All of our standing desk converters list a height range of the top shelf of the converter (e.g., the Desk Riser Classic rises from 4.75"H to 16.5"H). Use this range (from lowest to highest) along with the size chart below to determine if it fits your height.
    • An example: If you are 5'6" tall, then the standing desk converter only needs to rise up to 10 inches to fit your height. 

    Free Shipping

    All of our products include free shipping to anywhere in the lower 48 United States.  If you need it shipped anywhere else and need a shipping quote, please call us at (877) 575-0070 or email us at info @ deskriser.com.  

    30-Day Guarantee

  • Try it for 30 days, risk-free.
  • If you don't like it for any reason, just give us a call or send us an email and we will arrive to have it picked up. NOTE: You would be responsible for shipping charges back to our warehouse. For smaller items (desk converters, laptop stands, monitor mounts) it is $20 to $70. For larger items (full standing desks, conference tables) it can be $200+. Call us at (877) 575-0070 for more info.


  • 2 Year Warranty

    Our simple warranty covers the mechanics of all of our products for 2 years from the time you purchase it.  If for any reason it stops working, we will replace it for you immediately.  If you don't have the original box it arrived in, no worries.  We will send you a new box and take care of it from there.

    International Orders

    We ship our products out from Texas, Georgia and Colorado.  For any orders going outside of the United States, please contact us at (877) 575-0070 or email us at info @ deskriser.com to get a shipping quote.  Please note that you will be responsible for customs fees and taxes that might apply.  We always recommend contacting a freight broker to understand those costs.

     

     

     

    OUR PROMISE.

    It is our promise to you that we only manufacture products that we would use ourselves or that we would allow our children to use.

    Every DeskRiser product passes through an extensive production and testing process, all guided by our commitment to uncompromising craftsmanship.  

    No detail too small.

    From steel welding to painted finishes and beveled edges, every element of our products is carefully chosen and meticulously put into place. And before it leaves the production floor, our quality assurance team inspects every item by hand, ensuring no detail is overlooked. 

    Ease of Use.

    We strive to make every product simple to use for everyone.  No complex assembly instructions, no need for expensive tools to put our products together.  No IKEA! Most of our products are either fully assembled or near fully assembled.

    Get Up and Get Moving.

    Here at DeskRiser®, we know what it was like to feel lousy at work and in schools.  Those drab office and school environments that keep you bottled up are the reason why we started DeskRiser.  Our products are designed to keep you comfortable, productive, and energized throughout the day.  We know that everyone, from the 4 year old astrophysicist to the 90 year old kid at heart, needs flexible work solutions that are durable enough for the long haul, and that promote movement.

     

    QUESTIONS?

    Call us at (877) 575-0070 or email us at info @ deskriser.com. We are here to help.

     


    Industrial Drafting Table

    This hand-crafted industrial drafting table has a gorgeous reclaimed teak wood top featuring clean edges and the water-based catalyzed natural finish on the wood offers durability while showcasing the natural grain of the wood. Affixed to either end of the base are two rods that fit into the industrial cast iron base where the crank mechanism is connected to an antique styled handle, allowing the table's top to be either horizontal (for use as a standard table) or slanted up to a 60 degree angle (to be used as a drafting desk). The crank handle turns this in an industrial standing desk, adjustable in height from 33 inches to 42 inches high.



    Removable Stability Bar

    This vintage drafting desk comes with a removable metal ledge. This handy ledge lets you place your pens and pencils at your drafting desk without them falling to the ground. And if you're finding that it is in the way, just loosen the screws and remove it from the desk surface. 

    Reclaimed Teak Wood Surface

    Teak is considered to be the "gold standard" for decay resistance. This is because of its oil retention. While all woods contain oils that protect the tree (think maple sap or tea tree oil), teak exceptionally retains these oils and its rubber even after being felled and processed.

    Tilt-able Wood Top

    Release the tension on both sides of this table and tilt the entire table top to the degree of your choosing between 0 and 60 degrees to convert this beautiful table into an industrial style drafting desk. Comes with removable metal ledge that can be used for holding pens and pencils at your desk.

    Hand Crank Table Lift Mechanism

    Industrial old world style table features a hand crank table lift mechanism that is connected to the right side of the iron case base with a gear shaft that helps you easily lift and lower the table as you turn the wheel.

    The Fine Print

    Product Name: Beirut Industrial Drafting Table
    Overall Dimensions: 63"W x 31"D x 33"H
    Height Range: 33 to 43 inches High
    User Height: Up to 6ft tall
    How Much Can this Tilt? From Horizontal to 60 Degree Angle
    Wood Top: Reclaimed Teak Wood with Walnut Finish
    Base Materials: Hand-forged iron base in antique zinc finish
    Weight of Table: 204 lbs.
    How Does It Rise? Hand crank
    Assembly Required? Yes. Legs and top are shipped separately; tools are provided to affix legs to top. Requires 2 persons and takes 30 minutes
    Warranty: 2 Years
    Model Number:
    HOT-1165
    Product Name: Beirut Industrial Drafting Table
    Overall Dimensions: 63"W x 31"D x 33"H
    Height Range: 33 to 43 inches High
    User Height: Up to 6ft tall
    How Much Can this Tilt? From Horizontal to 60 Degree Angle
    Wood Top: Reclaimed Teak Wood with Walnut Finish
    Base Materials: Hand-forged iron base in antique zinc finish
    Weight of Table: 204 lbs.
    How Does It Rise? Hand crank
    Assembly Required? Yes. Legs and top are shipped separately; tools are provided to affix legs to top. Requires 2 persons and takes 30 minutes
    Warranty: 2 Years
    Model Number:
    HOT-1165

    Standing Desk Size Chart

    Are you confused about what height standing desk you need? Below is a standing desk converter size chart that might help you out (converters sit on top of your existing table or desk).

    Standing Desk Size Chart

    Some quick notes about this chart:

      • The standard height of a desk = roughly 29 inches. If your desk is different, measure it and adjust the numbers on the chart accordingly.
      • "Lowest height of standing desk converter keyboard tray" = the height from the floor to the top of the keyboard tray if the standing desk converter is at its lowest height.
      • The chart above assumes that the top shelf of the standing desk converters is 4 inches higher than the top of the keyboard tray.
      • All of our standing desk converters list a height range of the top shelf of the converter (e.g., the Desk Riser Classic rises from 4.75"H to 16.5"H). Use this range (from lowest to highest) along with the size chart below to determine if it fits your height.
      • An example: If you are 5'6" tall, then the standing desk converter only needs to rise up to 10 inches to fit your height. 

      Free Shipping

      All of our products include free shipping to anywhere in the lower 48 United States.  If you need it shipped anywhere else and need a shipping quote, please call us at (877) 575-0070 or email us at info @ deskriser.com.  

      30-Day Guarantee

    • Try it for 30 days, risk-free.
    • If you don't like it for any reason, just give us a call or send us an email and we will arrive to have it picked up. NOTE: You would be responsible for shipping charges back to our warehouse. For smaller items (desk converters, laptop stands, monitor mounts) it is $20 to $70. For larger items (full standing desks, conference tables) it can be $200+. Call us at (877) 575-0070 for more info.


    • 2 Year Warranty

      Our simple warranty covers the mechanics of all of our products for 2 years from the time you purchase it.  If for any reason it stops working, we will replace it for you immediately.  If you don't have the original box it arrived in, no worries.  We will send you a new box and take care of it from there.

      International Orders

      We ship our products out from Texas, Georgia and Colorado.  For any orders going outside of the United States, please contact us at (877) 575-0070 or email us at info @ deskriser.com to get a shipping quote.  Please note that you will be responsible for customs fees and taxes that might apply.  We always recommend contacting a freight broker to understand those costs.

       

       

       

      OUR PROMISE.

      It is our promise to you that we only manufacture products that we would use ourselves or that we would allow our children to use.

      Every DeskRiser product passes through an extensive production and testing process, all guided by our commitment to uncompromising craftsmanship.  

      No detail too small.

      From steel welding to painted finishes and beveled edges, every element of our products is carefully chosen and meticulously put into place. And before it leaves the production floor, our quality assurance team inspects every item by hand, ensuring no detail is overlooked. 

      Ease of Use.

      We strive to make every product simple to use for everyone.  No complex assembly instructions, no need for expensive tools to put our products together.  No IKEA! Most of our products are either fully assembled or near fully assembled.

      Get Up and Get Moving.

      Here at DeskRiser®, we know what it was like to feel lousy at work and in schools.  Those drab office and school environments that keep you bottled up are the reason why we started DeskRiser.  Our products are designed to keep you comfortable, productive, and energized throughout the day.  We know that everyone, from the 4 year old astrophysicist to the 90 year old kid at heart, needs flexible work solutions that are durable enough for the long haul, and that promote movement.

       

      QUESTIONS?

      Call us at (877) 575-0070 or email us at info @ deskriser.com. We are here to help.

       


      Customer Reviews

      Based on 1 review
      100%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      P
      Portrait Artist
      Well worth the investment!

      First off, I was impressed by the packaging of this table. It arrived securely strapped to a pallet. It arrived without a scratch, dent or ding. After taking off the packaging, it was fairly easy to assemble.
      I like the 62 inch width. This will allow me to not only create my portraits on, but will also accommodate a 42 inch mat cutter. So, from start to finish, it can all be done on this table.
      Another thing that is impressive about this table is the height adjustment. When creating large scale artwork, this is a must.
      Another impressive feature is the pencil ledge. This thing is heavy and solid.
      I wish I could have had this table 41 years ago when I started in the art field because I would still have it today.
      This table is well worth the investment! If you’re serious about your art, be serious about your table.