The DeskRiser Certified Used standing desk has been thoroughly inspected and confirmed to be in good working order. All of our certified used products have gone through a thorough 7 point inspection:
1 – Surface Check
All surfaces are inspected for dents and damages
2 – Corner Check
All corners are checked for dents and damages
3 – Side Check
We check the sides of each surface for dents and damages
4 – Joints Check
All joints are confirmed to be in good working order as they were originally manufactured.
5 – Weight Test
Products are tested with weights to confirm that they can support the factory recommended weights.
6 – Movement Check
We test any products that move to ensure they are not defective and that they work as intended.
7 – Cleaning
We use Seventh Generation Disinfecting Multi-Surface Cleaner on all surfaces: This solution kills 99.99% of household germs, specifically: Influenza A virus, H1N1, Rhinovirus type 37 (the Common Cold virus), Staphylococcus aureus, Salmonella enterica, Pseudomonas aeruginosa and Escherichia coli on hard, nonporous surfaces. It is a patented disinfecting technology based on Thyme Oil and is Earth friendly.
- Sits on Top of Your Desk or Table and Adjusts from Sitting Height to Standing, from 6.5-inch to 16.5-inch High.
- 32.5-inch Wide X 20.5-inch Deep. Can Fit Two (2) 24-inch Monitors.
- Keyboard Tray Slides out and Can Fit a Standard Sized Keyboard and Mouse.
- Very Easy to Adjust Heights up and Down. Uses 2 Simple Hand Levers (One on Each Side). Just Squeeze and Lift.
- Ships Fully Assembled: No Annoying Product Setup Guides Included and No Need to Set aside 4 Hours for Assembly.
Q: How high is the keyboard at its maximum height? I’m a tall person (6’1″) and am concerned about my arm position.A: It works best for people 5ft to 6ft 3in when sitting on a 29in high desk. For taller people consider a taller desk underneath or try out any of our Taller Standing Desks.
Q: When the unit is lowered all the way, does it actually take up more space than 20.5 inches listed for depth?A: Yes, the desk swings forward a few inches as it is lifted up. The total footprint is approximately 24 to 25in from the front to the back. The desktop hangs over the back of the support bars when it is lowered and it hangs slightly over the front of the support bars when it is raised.
Q: Is the distance between the keyboard tray and desktop / monitor platform adjustable?A: No, the distance is fixed between the keyboard tray and the desktop. The keyboard tray slides in and out but not up and down.
Q: I am making entries from bank statements etc. Is there room on the riser to set paperwork on it?A: Yes, an 8.5 x 11 fits, depending of course on your setup. If you have a dual monitor setup with the monitor bases at each corner of the desktop then you should have plenty of space to fit a notebook or paperwork on it.
Q: I’m concerned about weight distribution by having a 27″ iMac and a 20″ Apple monitor. Should I be concerned?A: The DeskRiser is rated and tested to support up to 50 lbs but the recommended total weight is about 35 lbs if you will be keeping heavier objects on it for an extended period of time. Just be sure to distribute the weight evenly to prevent anything from toppling over.
Q: Does this require any assembly?A: There is no assembly required. Just pull it out the box and you’re ready to go! We do advise testing it out a few times first before putting anything on it. Just lift and lower it a few times to get a hang of it.